StarTech.com ECS0016 manual Services Configuration

Instruction Manual

‘115200’, and ‘230400’.

Supported parity values are ‘None’, ‘Odd’, ‘Even’, ‘Mark’ and ‘Space’.

Supported data-bits values are ‘8’, ‘7’, ‘6’ and ‘5’.

Supported stop-bits values are ‘1’, ‘1.5’ and ‘2’.

Supported flow-control values are ‘Hardware’, ‘Software’ and ‘None’.

Services Configuration

You can manually enable or disable network servers from the command line. For example, if you wanted to guarantee the following server con- figuration:

HTTP Server: Enabled

HTTPS Server: Disabled

Telnet Server: Disabled

SSH Server: Enabled

SNMP Server: Disabled

Ping Replies (Respond to ICMP echo requests): Disabled

You would need to issue the following commands from the command line to set system configuration:

#/bin/config –-set=config.services.http.enabled=on

#/bin/config –-del=config.services.https.enabled

#/bin/config –-del=config.services.telnet.enabled

#/bin/config –-set=config.services.ssh.enabled=on

#/bin/config –-del=config.services.snmp.enabled

#/bin/config –-del=config.services.pingreply.enabled

The following command will synchronize the live system with the new configuration.

# /bin/config –-run=services

98