Instruction Manual
The first step is to set up the Nagios features on the console server:
1.Select System: Nagios on the ECS0016 Management Console.
2.Check to make sure the Nagios service is Enabled.
3.Enter the IP address that the central Nagios server will use to contact the distributed ECS0016 servers in Nagios Host Address.
4.Enter the IP address that the distributed ECS0016 server will use to contact the central Nagios server in Nagios Server Address.
5.Enter the IP address that the clients running MetaConnect will use to connect through the distributed ECS0016 servers as the MetaConnect Gateway address.
6.Check Prefer NRPE, NRPE Enabled and NRPE Command Arguments.
7.Check NSCA Enabled, choose an NSCA Encryption Method and enter and confirm an NSCA Secret. Remember these details as you will need them later on. For NSCA Interval, enter: 5
8.Click Apply.
Next, you must configure the attached Windows network host and specify the services you will be checking with Nagios (HTTP and HTTPS):
1.Select Network Hosts from the Serial & Network menu and click Add
76
