Instruction Manual

Initial Configuration

Unpack the ECS0016 kit and verify you have all of the parts indicated in the Package Contents list shown on the previous page, and that they all appear in good working order.

If you are installing your ECS0016 in a rack, you will need to attach the rack-mounting brackets supplied with the unit, and install the unit in the rack. Following this, proceed to connect your ECS0016 to the network, as well as to the serial ports of the controlled devices, and to an power outlet as outlined below.

Power Connection

The ECS0016 and CM4148 models have a built-in universal autoswitching AC power supply. This power supply accepts AC input voltage between 100 and 240 VAC with a frequency of 50 or 60 Hz and the power consumption is less than 20W.

AC power socket

The ECS0016 has an IEC AC power socket located at the rear of the metal case, which uses a conventional IEC AC power cord. The North American power cord is provided by default.

There is a warning notice printed on the back of each unit:

2

Page 9
Image 9
StarTech.com ECS0016 manual Initial Configuration, Power Connection, AC power socket