Instruction Manual
The console server may or may not be drawing power through the Managed UPS (see the Configure UPS powering the console server section below).
When the UPS’s battery power reaches critical, the console server signals and waits for slaves to shutdown, then powers off the UPS.
Serial and network connected UPSes must first be configured on the console server with the relevant serial control ports reserved for UPS usage, or the with the UPS allocated as a connected Host:
1.Select UPS as the Device Type in the Serial & Network: Serial Port menu for each port which has Master control over a UPS and in the Serial & Network: Network Hosts menu for each network connected UPS.
No such configuration is required for USB connected UPS hardware.
2.Select the Serial & Network: UPS Connections menu. The Managed UPSes section will display all the UPS connections that have already been configured.
3.Click Add UPS
37
