StarTech.com ECS0016 manual Using The MetaConnect client, Set up Windows XP/ 2003 client

Instruction Manual

ECS0016 gateways also support dial-back for additional security. Check the Enable Dial Back box and enter the phone number to be called to re- establish an OoB link, once a dial-in connection has been logged.

Using The MetaConnect client

Administrators can use the MetaConnect Java client software to set up secure OoB dial-in access to remote ECS0016 gateways. OoB access uses a different path for connecting to the gateway than that which is used for regular data traffic.

Starting an OoB connection in MetaConnect may be achieved by initiating a dial up connection, or adding an alternate route to the gateway, while allowing you to provide your own scripts or commands for starting and stopping the OoB connection.

Set up Windows XP/ 2003 client

1.Open Network Connections in Control Panel and click the New Connection Wizard.

2.Select Connect to the Internet and click Next.

3.On the Getting Ready screen select Set up my connection manually and click Next.

4.On the Internet Connection screen select Connect using a dial-up modem and click Next.

5.Enter a Connection Name (any name you choose) and the dial-up Phone number that will connect thru to the ECS0016 modem

6.Enter the PPP User name and Password that are set up for the ECS0016, select Next, then Finish.

Set up earlier Windows clients

For Windows® 2000, the PPP client set up procedure is the same as above, except to access the Dial-Up Networking Folder, click the Start button, select Settings then click Network and Dial-up Connections followed by Make New Connection.

53