Tektronix AM700 SOURce:FREQuency Subsystem

SOURce:FREQuency Subsystem
AM700 Audio Measurement Set Programmer Manual 3–113
SOURce:FREQuency Subsystem
SOURce[1–8]:FREQuency <numeric_value>
Usage: Sets the sine–wave frequency of the designated source. This frequency setting is
used as the fixed signal frequency when generating a sine–wave.
Suffixes: SOURce1 Analog generator HR A
SOURce2 Analog generator HR B
SOURce3 Analog generator HB A
SOURce4 Analog generator HB B
SOURce5 Digital generator DSF 1
SOURce6 Digital generator DSF 2
SOURce7 Digital Signal Processor A
SOURce8 Digtial Signal Processor B
Range: 0 to 20000 on High Resolution and 0 to 80000 on High Bandwidth.
Units: Hz.
Resolution: 0.5 Hz in HRES mode.
11.71875 in HBAND mode.
Query: SOUR[1–8]:FREQ? returns the sinusoidal signal frequency for the
designated source. If a sine–wave sweep is occurring, the return follows the
generator output frequency.
*RST: Sets the fixed frequency to 1000 Hz.
SOURce[1–8]:FREQuency:MODE CW|FIXed|SWEep|LIST
Usage: Sets the frequency sweep mode for the designated SOURce. CW and FIXed are
the same.