Phaser 3100MFP/X
Use of envelopes
•Feeding can be done only through the manual feed.
•Recommended area should be the area which excludes 15 mm from the leading edge, 10 mm from both the left and right edges, and the rear edge.
•A few lines may be given in solid print at the part of being overlapped.
•Envelopes which are not recommended may lead to improper printing (refer to the paragraph Specifications, page 83).
•Curled envelope after printing should be fixed manually.
•Small wrinkles on the edge of the wide side of envelopes, smearing, or less clear printing may appear on the reverse side.
•Gently press the envelope to release any air before loading it into the manual feed tray.
•Load envelope in a proper position after aligning in case it is bent or warped.
•Paper conditioning is not allowed. And it should be used under normal office environment.
- 23 -
