Phaser 3100MFP/X
3Check the Duplex box and choose among the two binding modes:
Binding mode | Printing |
|
|
|
|
Long sides |
|
Short sides
4Click on the OK button to begin printing.
5The machine prints the odd pages (from the higher odd page to page 1) and the LCD screen displays:
**PRINTING **
**PC **
6Once the odd pages are printed, the LCD screen
displays the message **PUT THE PRINTED SHEETS IN THE PAPER TRAY WITH THE PRINTED SIDE VISIBLE...:
**PUT THE PRIN
... AND PRESS <OK>
The PC generates and prints a page explaining how to reload the sheets for a duplex job. Read this page carefully and place it back with the
Important other sheets.
it is very important that you return the explanation sheet to the paper tray to continue printing correctly.
7Place the sheets in the paper tray as indicated on the explanation page and below.
The following illustrations describe the necessary operations depending on the selected binding mode:
• Long sides 
FeaturesPC
•Short sides
8Press OK on the control panel to resume printing.
9Even pages are printed on the other side of the sheets. Once all pages are printed, remove the explanation sheet.
If a paper jam or a paper size error Important occurs, the job is cancelled. You
must then resubmit the print job.
- 66 -
