Phaser 3100MFP/X
6Adjust the desired zoom level, from 25% TO 400%
with the buttons or , confirm with the OK button (only available in 1 Page to 1 copy mode).
7Adjust the desired origin values with the digital
keyboard buttons or then confirm with the OK button.
8Choose the resolution depending on the printing
quality that you want AUTO, TEXT, PHOTO or QUALITY TEXT with the buttons or , then confirm with the OK button.
9 | Adjust the contrast level with the buttons | or , |
| then confirm with the OK button. |
|
10 | Adjust the desired brightness level with the buttons | |
| or , then confirm with the OK button. |
|
11 Choose the paper type NORMAL, THICK with the buttons or , then confirm with the OK button.
ID Card Copy mode
The ID CARD copy function is used for copying both sides of an identity card or driver’s license type document on an A4 format sheet (original document size < A5) or on a Letter format sheet (original document size < Statement).
The LCD screen displays useful operating instructions (when the original document should be placed, when the document should be turned over, etc.) and asks for your confirmation to proceed with the operation.
This function is available only if the document to be copied is placed on the document glass, and if no paper
Important is detected in the automatic document feeder.
Zoom and Origin adjustments are not available in this copy mode.
1 Make sure that there is no document in the automatic document feeder.
2Press the 
button.
3Enter the desired number of copies and confirm with the OK button.
4Choose the paper tray AUTOMATIC or MANUAL
with the buttons | or , then confirm with the OK |
button. |
|
Copying in ID Card mode is only possible on A4 (original document size < A5) or Letter (original
Important document size < Statement) paper size. Make sure that the selected paper tray uses the correct paper size.
5Choose the copying option ID CARD with the
buttons or and confirm with the OK button.
6Choose the resolution depending on the desired printing quality AUTO, TEXT, PHOTO or QUALITY
TEXT with the buttons or , then confirm with the OK button. For optimal results with ID documents, select the PHOTO resolution.
7 | Adjust the contrast level with the buttons or | , | Copy | |
| then confirm with the OK button. |
| ||
8 | Adjust the desired brightness level with the buttons | |||
9 | or | , then confirm with the OK button. |
| |
Choose the paper type NORMAL, THICK with the | - | |||
| buttons | or , then confirm with the OK button. |
| 3 |
| The LCD screen displays the following message: |
|
| |
PUT ID CARD
THEN OK
10 Place your identity card or any other official document against the document glass, as shown below:
11 Press the OK button.
The document is scanned then the LCD screen displays the following message:
TURN UP DOC
THEN OK
12 Turn your document over then confirm with the OK button.
The machine prints out a copy of your document.
Special setups for copying
Setups done through this menu become the device default setups after you confirm.
When the quality of the printing is not satisfying, you can perform a
Important calibration (see Calibrate your scanner, page 43).
Resolution setup
The RESOLUTION parameter allows you to setup the photocopy resolution.
841 - ADVANCED FCT/COPY/RESOLUTION
1 | Press , enter 841 using the keypad. |
|
2 | Choose the resolution with the buttons | or |
- 25 -
