Phaser 3100MFP/X
paper or originals.
-For environmental reasons, do not dispose of the product or expended supply wastes at household waste collection point. Disposal can take place at our authorised dealer or at appropriate collection sites.
-Our products are engineered to meet the high standards of quality and functionality, and we recommend that you only use the expendable supplies available at an authorised dealer.
Power Supply
The power outlet should be close to the machine and should be easily accessible.
For Fax or Telephone
-Do not use this product near water, for example near bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
-Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of an electric shock from lightning.
-Do not use a telephone in the vicinity of a gas leak to report the leak.
Paper recommendations
Loading paper in the main paper tray
•Insert the paper face down and adjust the paper guides to the paper size to avoid feed failure, skewing and paper jams.
•Amount of loaded paper must not exceed the loading mark. If the loading mark is exceeded, this may cause feed failure, skewing, and paper jams.
•Adding paper during printing must be avoided because it may cause
•When removing the paper tray from the machine, always support it with both hands to avoid dropping it.
•If you use paper already printed by your machine or another printer, the printing quality may not be optimal.
Handling of paper
•Curling must be corrected before printing.
•Curls must not exceed 10 mm.
•Care must be taken with storage to prevent feed faults and image defects due to leaving the paper in conditions of high humidity.
Humidity control
•Paper which has become damp, or paper which has been left unused for a very long time, must not be used.
•After opening the paper, it must be kept in a plastic bag.
•Paper with waved ends, paper which is creased, paper with crumples, and any other
Handling the machine
Operator shocks
During printing, avoid shocks due to static electricity applied to the paper tray, covers and other parts of the machine.
Moving the machine
When moving the machine on a desk, it must be lifted and not dragged.
Handling the print cartridge
•Must not be stood on the side, or held upside down.
•Must not be shaken strongly.
- 15 -
