Chapter 2 Tutrial

Track editing (creating a loop phrase)

The LOOP 2 track is a loop that plays back endlessly, as is the LOOP 1 track. We will adjust the start/end point of the sample to create a loop that is suitable for our song.

The loop phrase editing procedure is the same as described on page 55 of “Build- ing Your Own Song.”

Modifying the sound

Applying a band-pass filter

We will use a band-pass filter to modify the sound of the LOOP 2 sample. By default, the FILTER group uses a low-pass filter (LPF), so we will first change this to a bandpass filter (BPF), and then modify the [CUTOFF] and [RESONANCE].

Procedure

1. Press the [TRACK SET] button, and then press the second button from the top to select [FILTER TYPE].

2. The display will indicate “FILTER TYPE=LPF” (default).

Rotate the dial to select “FILTER TYPE=BPF,” and press the [OK] button. The filter type has now been set to BPF.

102

Chapter 2 Tutorial