EVENT EDIT EVENT CLEAR

Use to: Delete all occurrences of a selected event type over a specified range of measures on the selected track. This job cannot delete note events, but can delete any other type event (knob events, pad events, and ribbon scratch events). But be aware that you cannot use it to delete specific instances of an event—you can only use it to delete all instances over some selected range of measures.

●After selecting the track, you can choose to delete any event type supported by the track (with the exception of note events on LOOP and COMPOSED LOOP tracks). You cannot select an event type that cannot exist on the track. (For example, you cannot choose to delete ROLL events from the AUDIO IN track, since the AUDIO IN track does not support ROLL events.)

●You can select any of the following for deletion (except where not supported by the track).

■All occurrences of a selected knob function

EVNT= LEVEL, PAN, PITCH,..., EFFECT 2, EFFECT 3

■All occurrences of a selected pad-function event type:

EVNT= MUTE, ROLL, LOOPRESTART

■All scene-recall events (from MASTER track only)

EVNT= SCENE

(Note that this operation does not affect the content of the scene-memory itself; it simply deletes all scene-recall events recorded on the track.)

■All events on the selected track (with the exception of note events on COM- POSED LOOP and FREE tracks).

Procedure

Be sure that you have selected the song containing the track you want to edit.

1. Press EVENT EDIT EVENT CLEAR to enter this job.

▼The track whose pad was last pressed is selected. The bank number and meter bracket indicate the selection, and the screen shows the name of the selected track. The screen will look something like this:

CHAPTER 10

Chapter 10 Jobs

251