Appendix

2. Connect up the flat cable.

Connect the free end of the flat cable into the corresponding CN2 in the SU700 (the long black 50-pin connector). The connectors are notched to ensure that you connect in the right direction.

(Viewing from rear.)

3. Connect up the 2-wire cable.

Connect the cable to the 2-pin connector (labeled “CN7 TO SCSI”) on the brown board inside the SU700. Note that the cable can attach to the connector in one direction only. Make sure that the direction is correct, and do not try to force the connection.

(Viewing from rear.)

324

Installing the Options