Chapter 2 Tutrial

Modifying the sound

For the CL2 track, only the pitch will be different.

[Settings]

 

SOUND group ..........

[PITCH] +100

Use the same procedure as for the LOOP 1 and 2 tracks to make settings.

Loop length setting

Using the same procedure as when you set the LOOP 2 track, set the sample loop length of the CL2 track to “LOOP LENGTH=016.”

Recording to the sequencer

Now we will record the sample for the CL2 track on the sequencer.

The sample for the CL2 track will be looped over 16 quarter-note beats (four mea- sures), and will sound for three beats from the second beat of measure 4. (See diagram below.)

CL2 sample

Begin recording as you did for the CL1 track. When you reach the second beat of measure 4 (MEASURE display of 004:2), press and hold the CL2 pad. Release it after three beats (immediately before you reach 005:1).

110

Chapter 2 Tutorial