Yamaha SU700 COMP [COMPRESSOR], COMP+DS [COMP+DIST], AMPSIM [AMP SIMULATOR], 15: OVERDRV [OVERDRIVE]

15: OVERDRV [OVERDRIVE]

Appendix

1	Drive	DRIVE	0,...,127
2	LPF Cutoff	LPF FRQ	34,...,60
3	EQ Mid Freq.	MIDFREQ	14,...,54
4	Output Level	OUT LVL	0,...,127
5	Dry/Wet Balance	DRY WET	D63>W,...,D_W,
			...,D<W63

Degree of distortion

Frequency at which the filter will cut the high range

Frequency at which the EQ will boost/cut the mid range

Output level

Balance between the dry sound and the effect sound

16:	AMPSIM [AMP SIMULATOR]
1	Drive	DRIVE	0,...,127	Degree of distortion
2	Amp Type	AMPTYPE	OFF, STACK,	Select the type of amp to be simulated
			COMBO, TUBE
3	LPF Cutoff Freq	LPF FRQ	34,...,60	Frequency at which the low pass filter will
				cut the high range
4	Edge	EDGE	0,...,127	Curve of distortion characteristics (sharp
				(127): distortion begins suddenly;
				mild (0): distortion begins gradually)
5	Output Level	OUT LVL	0,...,127	Output level

17:	COMP [COMPRESSOR]
1	Threshold	THRSHLD	-48,...,-6	Input level at which compression begins to
				be applied
2	Attack	ATTACK	1,...,40	Time until when the compressor begins to
				take effect
3	Release	RELEASE	10,...,680	Time until the compressor effect disappears
4	Ratio	RATIO	1.0,...,20.0	Compression ratio of the compressor
5	Output Level	OUT LVL	0,...,127	Output level

18:	COMP+DS [COMP+DIST]
1	Threshold	THRSHLD	-48,...,-6	(Compressor) Input level at which compres-
				sion begins to be applied
2	Ratio	RATIO	1.0,...,20.0	(Compression) Compression ratio of the
				compressor
3	Drive	DRIVE	0,...,127	Degree of distortion
4	LPF Cutoff	LPF FRQ	34,...,60	Frequency at which the low pass filter will
				cut the high range
5	Output Level	OUT LVL	0,...,127	Output level

338 Effect Parameter List