Chapter 10 Jobs

<CONTROL NUMBERS>

Use this job to set the MIDI controller number (control-change number) associated with each knob function. Specifically, the settings you make here determine (a) the outgoing control-change messages generated by SU700 knob action, and (b) the functions controlled by incoming control-change messages received from an external MIDI device.

As an example, suppose that the LEVEL function is set to 007. (Note that 007 is the standard MIDI controller number for the “main volume” control-change message.) In this case, then, any time you turn a knob that is assigned to the LEVEL function, the SU700 will transmit a 007 control-change message over the track’s MIDI Transmit channel (assuming that such a channel is set), thereby changing the main volume at the external device. In addition, any incoming 007 control-change message will change the level on the track (if any) whose MIDI Receive channel matches the channel on which the message is received.

You can set controller numbers for the 17 functions listed along the left below. The values at right are the defaults; available values are OFF, 001,...,095. Note that all numerical settings must be unique; the SU700 will not allow you to set the same number for multiple parameters.

LEVEL

007

PAN

010

PITCH

OFF

ATTACK

073

RELEASE

072

SAMPLE LNGTH

OFF

LFO SPEED

OFF

LFO AMP DPTH

OFF

LFO FIL DPTH

OFF

LFO PIT DPTH

01

EQ HI GAIN

OFF

EQ LO GAIN

OFF

FILTR CUTOFF

074

RESONANCE

071

EFFECT 1

OFF

EFFECT 2

OFF

EFFECT 3

OFF

306

Chapter 10 Jobs