The following illustration shows the connection configuration when insertion effects have been assigned to all three blocks.
LOOP
MASTERAUDIO INFREE
EFFECT
1 2 3
EFFECT 1
2
3
OFF 1
2
3
EFFECT 1
OFF | OUT |
1 | EFFECT 2 | |
2 | OUT | |
3 |
| |
OFF |
| |
1 |
| |
2 | EFFECT 3 | |
OUT | ||
3 | ||
|
OFF 1
2
3
OFF
CHAPTER 7
MASTER knob controls level for all connected tracks.
7.6Usage Tips
●Remember that when you use the knobs to control the EFFECT levels during re- cording, these knob actions are recorded as sequence events. These events apply to the block, not to the assigned effect itself. If you change the effect assignment (from system effect to a different system effect, or from insertion effect to a different insertion effect), the knob actions will be reproduced even though the effects are different.
●The easiest way to try out the sound of different effects is as follows:
1)Record some song data, and start playing the song.
2)Press the [SETUP 1], [SETUP 2], or [SETUP 3] button.
3)Use the dial to try out the different effects, and use the knobs to adjust the effect levels. You can quickly try out the sound of many effects to see which one best meets your needs.
Chapter 7 Effects | 191 |