![](/images/backgrounds/183988/183988-354279x1.png)
4. Press to move the L/R channel mode setting, and then turn the dial to select the L/R channel mode. Then press [OK].
▼The screen displays SELECT TRACK, prompting you to select the track on which you want to record the sample.
5.Select the destination track.
Select the track by pressing a bank selector and/or track pad. The bank number and meter bracket change to indicate the track selection. Remember that you must select an empty LOOP, COMPOSED LOOP, or FREE track.
NOTE:
If you select a track that already has a sample on it, the screen displays the TRACK NOT EMPTY message. Change the track selection, or press [CANCEL] as necessary to return to the main screen.
6. Press [OK].
▼The screen displays START SEQ. You now have two choices:
(1)You can begin to resample immediately from the current song position, simply by pressing the [SAMPLING] button; or...
(2)You can start song playback first by pressing the button. The song starts from the current position, and the screen displays PRESS/START STOP. Wait for the song to reach the location at which you want to start recording, and then press the [SAMPLING] button to begin resampling.
NOTE:
In either case you are free to adjust the song position ahead of time using the various sequencer buttons, the dial, or your preset markers. But keep in mind that some positional adjustments may cause the song to jump over important sequence causing the song to sound different from what you’d expect. To avoid this problem, you may want to allow the song to play out normally starting from the location of a recorded
7. Begin resampling as described above.
▼The SU700 begins resampling. The screen keeps you informed of the remaining available recording time and the current song location, and the current BPM setting.
CHAPTER 10
Chapter 10 Jobs | 279 |