Parameters

The first five parameters are different for each effect. For an explanation of each effect and its parameters, to the effect listings starting on page 333.

The subsequent parameters set up the output from the effect block itself, and are therefore the same regardless of the selected effect. These parameters are as follows. Refer also to the diagram below.

LEVEL

Sets the output level from the effect block. (See illustration, page 188.)

 

Range:

000 to 127

 

Default:

100

PAN

Sets the pan (positioning) for the output from the effect block. (See illus-

 

tration, page 188.)

 

Range:

L64,...,L01, C, R01,...,R63

 

Default:

C (center)

EF2 SEND

This parameter is available only for block 1 (only under the [SETUP 1]

 

function). The parameter sets the level for the signal feed from block 1

 

into block 2. (See illustration, page 188.)

 

Range:

000 to 127

 

Default:

000

EF3 SEND

This parameter is available only for blocks 1 and 2 (only under the

 

[SETUP 1] and [SETUP 2] functions. The parameter sets the level for

 

the signal feed from the corresponding block into block 3. (See illustra-

 

tion, page 188.)

 

Range:

000 to 127

 

Default:

000

CHAPTER 9

Chapter 9 Editing Functions

219