Chapter 10 Jobs

SONG NAME

Use to: Edit the name of the currently selected song.

●Maximum name length is eight characters.

●The default song name is SONGxx, where xx is the song number.

●You cannot use a name that is already assigned to another song.

Procedure

1. Press SONG NAME to enter this job.

▼The screen shows both the song number (at the left) and the song’s current name (at the right). The first character of the name is flashing.

2.Press or to move the “cursor” to the character position at which you want to change, insert, or delete a character. (The cursor location is indicated by flashing character or underscore.)

3.You can now change the character as necessary. To delete it, press [NAME/DELETE]. To insert a new (space) character, press [NAME/INSERT]. To change the character to a different character (space, number, uppercase letter, or underscore), turn the dial.

NOTE:

• The [NAME/INSERT] and [NAME/DELETE] buttons are located below the knob-function selectors, immediately to the left of the display.

•Turning the dial from full left to full right selects characters in the following order: space, 0 to 9, A to Z, underscore. (Note that the space character and underscore character look the same during editing, but will look different once you move the cursor to a different position.)

4.Repeat steps 2 and 3 as necessary to enter the entire name. (You can press [CANCEL] at any time to cancel the job and retain the original name.)

5.Press [OK] to register the new name and return to the main screen.

NOTE:

If you enter a name that is already assigned to another song, the screen briefly displays the error message NAME EXISTS and then returns you to the name-entry screen. Enter a unique name and press [OK] again, or else press [CANCEL] as necessary to escape.

228

Chapter 10 Jobs