Yamaha SU700 2.4.5 Creating the COMPOSED LOOP 3 track

2.4.5 Creating the COMPOSED LOOP 3 track

■Sampling

We will sample track 45-1 “*Harp Gliss Down” from the included audio CD to the COMPOSED LOOP 3 track (subsequently referred to as CL3).

●The sampling procedure is the same as described on page 47 of the preceding sec- tion, “Building Your Own Song.”

●Set the sampling grade to “22K 8BIT MONO L.”

■Modifying the sound

For the CL3 track, we will set the following parameters.

[Settings]
SOUND group ..........	[PAN]	L30
	[PITCH]	+062
LFO group ................	[SPEED]	026
	[FILTER]	068
FILTER group ...........	[CUTOFF]	110
	[RESONANCE]	080
EFFECT group .........	[EFFECT 1]	025
	[EFFECT 2]	080
	[EFFECT 3]	070

Make these settings using the same procedure as you did for the LOOP 1 and 2 tracks.

■Loop length setting

Using the same procedure as you did for LOOP 2, set the sample loop length of the CL3 track to “LOOP LENGTH=016.”

■Recording to the sequencer

Now we will record the sample for the CL3 track on the sequencer.

The sample for the CL3 track will be looped over 16 quarter-note beats (four mea- sures), and will sound for three beats from the beginning of measure 1. (See diagram below.)

CL3 sample

CHAPTER 2

Chapter 2 Tutorial 111