106

LCD Error Messages

Table 9 • LCD Error Messages (Continued)

LCD Display/

Possible Cause

Recommended Solution

Print Engine Condition

 

 

 

 

The print engine is defragmenting

Caution • Do NOT turn off the

 

DEFRAGMENTING

 

memory.

 

print engine power during

 

 

 

 

 

 

defragmenting. Doing so can damage

 

The print engine stops.

 

the print engine.

 

 

Allow the print engine to finish

 

 

 

 

 

 

defragmenting. If you get this error

 

 

 

message frequently, check your label

 

 

 

formats. Formats that write to and erase

 

 

 

memory frequently may cause the

 

 

 

printer to defragment often. Using

 

 

 

properly coded label formats usually

 

 

 

minimizes the need for defragmenting.

 

 

 

If this error message does not go away,

 

 

 

contact Technical Support. The

 

 

 

print engine requires service.

 

 

 

 

 

 

There is not enough memory to

Free up some of the print engine’s

 

OUT OF MEMORY

 

perform the function specified on

memory by adjusting the label format

 

(function)

the second line of the error

or print engine parameters. One way to

 

 

message.

free up memory is to adjust the print

 

 

 

width to the actual width of the label

 

 

 

instead of leaving the print width set to

 

 

 

the default. See Set Print Width

 

 

 

on page 67.

 

 

 

 

 

 

 

Ensure that the device, such as FLASH

 

 

 

memory or PCMCIA card, is installed

 

 

 

and not write protected or full.

 

 

 

 

 

 

 

Ensure that the data is not directed to a

 

 

 

device that is not installed or is

 

 

 

unavailable.

 

 

 

 

 

 

 

Refer to the Maintenance Manual for

 

 

 

more information about the specified

 

 

 

function.

57512L-004

110PAX4/R110PAX4 User Guide

6/29/11