Introduction 17

Control Panel

Control Panel

All controls and indicators for the print engine are located on the control panel (Figure 3). The Liquid Crystal Display (LCD) shows print engine operating status and feature parameters. The buttons are used to control the print engine operations and change parameters. The lights (LEDs) indicate the print engine’s status.

Figure 3 • Control Panel (Right-Hand)

1

 

2

1

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Buttons

2LCD

3Lights/LEDs

Control Panel Buttons

The control panel buttons are described in Table 1.

 

Table 1 • Control Panel Buttons

 

 

ButtonDescription/Function

 

 

LEFT and RIGHT

The left and right ovals are used to change parameter values for a parameter being

OVALdisplayed on the LCD. Common uses include increasing or decreasing a value,

 

answering yes or no, indicating ON or OFF, and scrolling through choices.

 

 

PREVIOUSScrolls the LCD to the previous parameter.

 

 

NEXTScrolls the LCD to the next parameter.

 

 

SETUP/EXITEnters and exits configuration mode.

 

 

PAUSE

Stops and restarts the printing process or removes error messages and clears the LCD.

 

If a label is printing, it is completed before the printing process stops. When the

 

print engine is paused, the PAUSE light is ON.

 

 

6/29/11

110PAX4/R110PAX4 User Guide

57512L-004 Rev. A