Zebra Technologies 110PAX4, R110PAX4 Media Specifications, mode, mode, mode, Hole, Notch, Minimum, Maximum, Minimum, Minimum, Maximum, Minimum, Density, Non-RFID, Vertical, Position, Position

Specifications 153

Media Specifications

Media Specifications

Media width	Minimum	Non-RFID	0.63 in. (16 mm)
(label and liner)
		RFID “smart” labels	Minimum label widths for RFID “smart” labels
			varies for each transponder type.
	Maximum		4.5 in. (114 mm)
Label length	Minimum	Non-RFID, applicator	0.5 in. (12.7 mm) with backfeed on
		mode*	0.25 in. (6.4 mm) with backfeed off
		Non-RFID, tear-off	0.5 in. (12.7 mm) with backfeed on
		mode	0.25 in. (6.4 mm) with backfeed off
		Non-RFID, rewind	0.25 in. (6.4 mm) (“loose loop”)
		mode
		RFID “Smart” labels	Minimum label length for RFID “smart” labels
			varies for each transponder type.
Registration tolerance		Vertical	±0.040 in. (±1.0 mm)
(not including label/liner		(concurrent labels)	(in Applicator mode)
position tolerances)
		Horizontal	±0.040 in. (±1.0 mm)
Total thickness (including liner)			0.0058 in. to 0.010 in. (0.148 mm to 0.256 mm)
Interlabel Gap		Minimum	0.079 in. (2 mm)
(Transmissive Sensor)
		Preferred	0.118 in. (3 mm)
		Maximum	0.157 in. (4 mm)
Notch		Size (W x L)	0.25 in. × 0.12 in. (6 mm × 3 mm)
		Position	On inside edge, <0.8 in (<20 mm) from leading
			edge of media
Hole		Minimum	0.125 in. (3.2 mm)
		Position	0.25 to 3.0 in. (6.3 to 76.2 mm) from inside edge
			<0.8 in. (<20 mm) from leading edge of media
Black Mark		Vertical length (parallel	0.12 in. to 0.43 in. (3 mm to 11 mm)
(Reflective Sensor)		to inside media edge)
		Horizontal width	0.43 in. (≥ 11 mm) minimum
		(perpendicular to inside
		media edge)
		Position	One of the following:
			• within 0.04 in. (1 mm) of the inside edge and
			<0.8 in (20 mm) from leading edge of media
			• centered within 0.23 in. to 2.25 in. (5.8 to 57 mm)
			from the media inner edge
		Density	> 1.0 Optical Density Units (ODU)
			Maximum media density: 0.5 ODU
Print Line to Peel Bar Distance			0.464 in. (11.8 mm)

* PAX4 printers are not recommended for use with fanfold media in applicator mode.

6/29/11 110PAX4/R110PAX4 User Guide 57512L-004 Rev. A