Zebra Technologies 110PAX4, R110PAX4 Toggle Positioning, on page, Adjust Print Darkness, PAUSE Self Test on page 121), To adjust the toggle, complete these steps:

Routine Maintenance 95

Toggle Positioning

Toggle Positioning

Proper toggle positioning is important for proper print quality. The toggle should be positioned approximately midway across the width of the media.

Caution • Observe proper electrostatic safety precautions when handling any static-sensitive components such as circuit boards and printheads.

To adjust the toggle, complete these steps:

1.Print some labels at 2.4 in. (61 mm) per second by running the PAUSE Self Test (see

PAUSE Self Test on page 121).

2.While printing labels, use the control panel to lower the darkness setting until the labels are printing gray instead of black (see Adjust Print Darkness on page 64).

3.Caution • The printhead may be hot and could cause severe burns. Allow the printhead to cool.

Loosen the locking nut at the top of the toggle assembly.4.Position the toggle over the center of the labels.

6/29/11 110PAX4/R110PAX4 User Guide 57512L-004 Rev. A