Zebra Technologies 110PAX4, R110PAX4 2.Open the media door, Figure 14 • Loaded Media, Press the release button, To load media, complete these steps:

Operations 41

Load Media

Figure 14 • Loaded Media

Left-Hand Right-Hand

Caution • While performing any tasks near an open printhead, remove all rings, watches, hanging necklaces, identification badges, or other metallic objects that could touch the printhead. You are not required to turn off the printer power when working near an open printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose all temporary settings, such as label formats, and you must reload them before you resume printing.

To load media, complete these steps:

1.Load media on the media supply reel of the applicator (refer to the applicator’s user guide).

2.Open the media door.

3.Press the release button (1) on the pinch roller assembly (2), and allow the assembly to pivot up.

2

1

6/29/11 110PAX4/R110PAX4 User Guide 57512L-004 Rev. A