Zebra Technologies 110PAX4, R110PAX4 Clean the Media Compartment, Clean the Sensors, 2Reflective media sensor, 1Upper transmissive media sensor, 3Lower transmissive media sensor

Routine Maintenance 91

Clean the Media Compartment

Clean the Media Compartment

Remove any accumulated dirt and lint from the interior of the print engine using a soft bristle brush and/or vacuum cleaner. This area should be inspected every time a new ribbon is loaded.

Clean the Sensors

To ensure proper operation of the print engine, all sensors should be cleaned on a regular basis. The sensors are shown in the following:

•See Figure 24 for the media sensors.•See Figure 25 on page 92 for the door-open sensor.•See Figure 26 on page 92 for the ribbon sensor.Figure 24 • Media Sensor Locations (Right-Hand Unit Shown)

1

2

3

1Upper transmissive media sensor2Reflective media sensor3Lower transmissive media sensor

6/29/11 110PAX4/R110PAX4 User Guide 57512L-004 Rev. A