Zebra Technologies 110PAX4, R110PAX4 Memory Errors, ~HM, Storing Font, Storing Bitmap, Storing Format, Creating Bitmap, CREATING BITMAP, Building Format, Storing Graphic, Table 10 • Memory Errors

107

Memory Errors

Memory Errors

The memory errors in Table 10 indicate that the print engine does not have enough memory to perform the function shown on the second line of the LCD.

Table 10 • Memory Errors

Problem/LCD Display	Possible Cause	Recommended Solution
	Creating Bitmap	You may do any of the following:
OUT OF MEMORY
	The bitmap size (label	• Press PAUSE. Send a ~HM ZPL
CREATING BITMAP
	length/width) does not fit in	command to the print engine to display
	available memory.	the amount of free memory. Then
		redesign the graphic/format to fit
	Storing Bitmap
OUT OF MEMORY	Not enough memory is	available memory, or remove items from
STORING BITMAP		memory to create more space.
	available to store the bitmap
		• Press PAUSE to skip the formatting step
	created.
		in process and proceed to the next step.
	Building Format
		With the print engine paused, press
OUT OF MEMORY
	Label is too complex.
		CANCEL.
BUILDING FORMAT
		The print engine skips the current label
	Storing Format	formatting process and goes to the next
OUT OF MEMORY	Format is too large to fit in	label.
STORING FORMAT	available memory.	• Turn the print engine off (O) and then on
		(I) to clear the print engine’s memory.
	Storing Graphic
OUT OF MEMORY
	The graphic image is too large
STORING GRAPHIC	to fit in available memory.
	Storing Font
OUT OF MEMORY
	Not enough memory available
STORING FONT	to store the font.

6/29/11 110PAX4/R110PAX4 User Guide 57512L-004 Rev. A