Zebra Technologies 110PAX4, R110PAX4 PAUSE Self Test, Figure, Figure, Turn off, Press and hold, Figure 28 • PAUSE Test Label, 1.Turn off (O) the print engine

121

Print Engine Diagnostics

PAUSE Self Test

This self test can be used to provide the test labels required when making adjustments to the print engine’s mechanical assemblies or to determine if any printhead elements are not working. Figure 28 shows a sample printout.

To perform a PAUSE self test, complete these steps:

1.Turn off (O) the print engine.

2.Press and hold PAUSE while turning on (I) the print engine. Hold PAUSE until the first control panel light turns off.

•The initial self test prints 15 labels at the print engine’s slowest speed, and then automatically pauses the print engine. Each time PAUSE is pressed, an additional 15 labels print. Figure 28 shows a sample of the labels.

Figure 28 • PAUSE Test Label

•While the print engine is paused, pressing CANCEL alters the self test. Each time PAUSE is pressed, 15 labels print at 6 in. (152 mm) per second.

•While the print engine is paused, pressing CANCEL again alters the self test a second time. Each time PAUSE is pressed, 50 labels print at the print engine’s slowest speed

•While the print engine is paused, pressing CANCEL again alters the self test a third time. Each time PAUSE is pressed, 50 labels print at 6 in. (152 mm) per second.

•While the print engine is paused, pressing CANCEL again alters the self test a fourth time. Each time PAUSE is pressed, 15 labels print at the print engine’s maximum speed.

•To exit this self test at any time, press and hold CANCEL.

6/29/11 110PAX4/R110PAX4 User Guide 57512L-004