Polycom RSS 4000 Ports, To apply for the certificate, To upload the certificate to the server

Chapter 4 – Administrator Configuration

Parameter

Description

Key Size	Key size, defaulted to 512 digits. You can select 1024
	digits or 2048 digits as needed.
Challenge Password	Certificate request challenge password, which can further
	strengthen security of the certificate request.

4Click OK to complete certificate request creation.

To apply for the certificate:

1Click View Last Certificate Request in the certificate setting page to view the information about certificate request created.

2Copy the information in the text box to the certificate application page of the certificate issuing organization from which you purchased service. The information will be used to generate a certificate.

To upload the certificate to the server:

1After obtaining the certificate successfully, click Open in the Certificate Setting page.

2Select the saving path of the certificate file in the popup dialog box for uploading files, and click Open.

3Click Upload button in the Certificate Setting page to upload the certificate to Polycom® RSS™ 4000 system.

Click View Certificate Information to view information on the certificate installed in the system.

After installing the certificate you purchased, the browser will not show alert about website security certificate problems when you log in to the system. Instead, you will be directly linked to the login page of the system.

Ports

The port on Port page used to set firewall to allow H.323 call.

To configure the port:

1Click System Config>Security Setting>Ports in the menu bar at the top of the page.

2Configure the following parameters on the Ports page:

Table 4-18Port Parameters Description

Parameter	Description
	Specifies whether to define the TCP and UDP ports.
	 Leave this check box clear if you are defining a
	Network Service for local calls that does not require
Fixed Ports for H.323	configuring a firewall to accept calls from external
	entities. When this option is not selected, the system
	uses the default port range.
	 If the firewall is incompatible with H.323, enable this
	setting and specify the TCP and UDP port ranges.

4-22