Polycom® RSS™ 4000 User Guide
“set {lan1 lan2} speed {auto 1000 100 full 100 half 10 full 10 half}” - set the connection features for the LAN 1 or LAN2 interface.
Table 6-3 Network Setting Parameters – LAN Interface IP Address
Parameter
Description
dhcp
static
Automatically gets the address information through the DHCP server.
Specifies the static IP address information - Ip: IP address of the network port
mask: subnet mask of the network port
gateway: gateway address of the network port
Table
Parameter
Description
auto | Auto negotiation mode |
|
|
1000 | 1000Mbps |
|
|
100 full | 100Mbps full duplex |
|
|
100 half | 100Mbps half duplex |
|
|
10 full | 10Mbps full duplex |
|
|
10 half | 10Mbps half duplex |
|
|
[Example 1] Set the IP address of the LAN1 interface to 172.21.103.29, subnet mask to 255.255.255.0, and the gateway address to 172.21.103.254:
[Example 2] Set the 100M half duplex for the LAN1 interface:
After you set the connection feature or IP address for the LAN interface, the system must be restarted in order for the new settings to take effect.