Polycom 3725-32870-002, RSS 4000 manual To restore the system to the factory default status

Page 63

Polycom® RSS™ 4000 User Guide

•All current configuration and recorded archives will be cleared after the system is restored to the default configuration.

•Before the system restarts to complete restoring to the factory default configuration, please remove the USB device connected to the system. Otherwise, after the system restarts, you will receive a default configuration setting dialog box when you try to log in to the Web UI.

To restore the system to the factory default status:

1Connect the USB storage device to the USB port on the back panel of the system.

2Restart the device manually, or click Restart button on the Shutdown page (Admin>Shut Down) to restart the system.

3After the system restarts, log in to the Web Configuration page. A default configuration setting dialog box will display on the page.

4You can configure following parameters:

Table 4-24Default restoration Parameters Settings

Parameter

Description

	Build-in Account	System built-in default administrator account. The user
		System built-in default administrator account. The user
		name and password can be modified here.
	Password	name and password can be modified here.
	Password

	Confirm Password	Specifies the confirm password.

		Specifies whether or not the default configuration
		restoration reserves the current system IP address. If not
	Keep current IP setting	selected, the system will reset the IP address to the default
		192.168.1.254, subnet mask to 255.255.255.0, and
		gateway to 192.168.1.1.

5Click Next; if you want to continue, enter YES in the box to confirm restoration, and click OK. Click Back button to go back to the setting box.

6Remove the USB storage device before the system restarts to complete restoration.

4-33

Image 63

Contents Polycom RSS 4000 System User Guide USA Content Content Iii Page Polycom Solution Support Services Page Overview Polycom RSS IntroductionTo unpack the system package System Hardware InstallationGeneral Safety Precautions Unpack the PackageObtaining Network Information System Initial ConfigurationInstall the System Preparations before ConfigurationModifying the Initial IP Address To change IP address via the Web loginParameter Description Optional Configuring the Gatekeeper Settings To change IP address via RS-232 Console or TelnetTo register the system to the gatekeeper User Interface Web User InterfaceTV User Interface Page Introduction to the Web User Interface Basic OperationsUser Permissions Common OperationsList Sorting, Searching, and Refreshing Starting a Recording Sizing the PaneWindows Standard Multiple-Select Operations Playing Back Recorded Files To start a recording by dialing the Polycom RSS 4000 systemTo play back from the Web UI Polycom RSS 4000 User Guide Page To modify personal settings Personal SettingsDialing-in to a VRR to Start Recording To change passwordTo dial VRR through an endpoints remote control Virtual Recording Room VRRTo modify an existing VRR Modifying a VRRViewing Archives ArchivesTo play back archives through the Web UI Playing Back and Downloading ArchivesModifying Archives To download an archiveTo modify archive properties Live Streaming Starting a Live StreamingViewing Live Streaming Information To view live streaming in progress Viewing Live Streaming VideoTo define a recording template Recording TemplatesViewing Template Information Defining a TemplateTo edit or delete a created template Managing TemplatesTo define a VRR Defining a VRRDialing a VRR to Start Recording Managing VRRs ChannelRecording Setting To configure recording setting optionsTo edit or delete a created channel Live Streaming Resources Usage Archives and Live StreamingNetwork Service IP SettingTo configure LAN port parameters Gatekeeper To configure the system to use a gatekeeperTo specify QoS parameters QoSUser Management UserViewing Users To add a local user Adding a New UserManaging Users To import an AD userTo modify user information To delete a user To modify user password local user onlyGroups Creating a New GroupActive Directory Service SettingTo configure an Active Directory server Managing GroupsTo configure mail server information in Polycom RSS Calendar ConfigurationViewing Outlook Conference Archives Signaling Connection System MonitoringDashboard System Information Web View SessionsSystem Alerts Web ConnectionsGatekeeper Status Last Login InformationSystem Logs Hardware StatusTo set a hard disk warning threshold Certificate SettingSystem Security Hard Disk WarningTo upload the certificate to the server To configure the portPorts To apply for the certificateTo set security policy Security PolicyClick Update to apply settings System Management System Configuration Backup/RestoreUser Data Backup/Restore To backup current system configurationTo manually back up the recorded files FTP Server ConfigurationArchives Backup To automatically back up archivesTo restore recorded files System UpgradeArchives Restore To upgrade from Version 5.0 to VersionVersion 5.0 remaining operation To activate the upgraded systemDelete v5.0 system files Restore the system from v6.0 toProduct Activation Import recorded files fromUI Customization IVR CustomizationTo customize the IVR information Customizing Web Interface Logo Customizing Endpoint MenuChanging System Name To set the system time Restoring Factory Default ConfigurationSystem time Restart and ShutdownTo restore the system to the factory default status Page Introduction to Main Menu TV User Interface OperationFecc Dtmf To start recording Start RecordingViewing Archives To set PIN codeTo view all videos recorded on Polycom RSS To view the videos recorded by current VRRHyperTerminal Parameters LoginCommand Introduction Telnet Setting Reset PasswordRestore System Configuration Clean Activation KeyPassword Modification Network SettingPing 3Network Setting Parameters LAN Interface IP Address Page Appendix B Regulatory Notices Regulatory Notices USA and Canadian Regulatory Notices Special Safety Instructions Regulatory Notices