Polycom RSS 4000 manual System time, Restart and Shutdown, Restoring Factory Default Configuration

Chapter 4 – Administrator Configuration

3Click Reboot Now in the popup message box to restart the system and apply settings.

System time

Setting accurate system time ensures the correct display of time information such as recording and backup time. The built-in clock of the system can also be synchronized with a network time server.

To set the system time:

1Click System Config>System Time in the menu bar at the top of the page.

2Configure the following parameters in the System Time page:

Table 4-23System Time Parameters Description

Parameter

Description

	Specifies the way to set the system time:
The time service	 The Console: synchronizes time with user computer.
	 The NTP Server: obtains time from a time server.
Date	Indicates the current date and time of the system. When
	The Console is selected, you can obtain user computer
Time	current time after refreshing the page. Manually changing
	the time here is not recommended.
	Specifies the address or domain name of a network time
	server. The system built-in clock can be synchronized with
NTP servers	the time server.
	Note: If you set a domain name, make sure you have
	already set a DNS server address that can resolve this
	domain name in System Config>IP Setting.

Restart and Shutdown

Click Admin>Shut Down on the Web interface to enter the Shut Down page.

Clicking the Restart button will restart the system; clicking Shut Down will shut down the system.

Before unplugging the system, you need to shut it off via the Shutdown page to turn it off.

Restoring Factory Default Configuration

You can clean the system and restore it to the factory default configuration through its USB port. Only the software version and system IP address can be reserved. You need to use an USB storage device before you restore the system to the default status. There is no requirement on USB device type and files it stores.

4-32