Texas Instruments TNETX3270 specifications Important Notice

Page 65

IMPORTANT NOTICE

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.

CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (ªCRITICAL APPLICATIONSº). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK.

In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof.

Copyright  1999, Texas Instruments Incorporated

Image 65

Contents With 24 10-MBIT/S Ports and 3 10-/100-MBIT/S Ports TNETX3270 ThunderSWITCH 24/3 ETHERNET SwitchDescription With 24 10-MBIT/S Ports and 3 10-/100-MBIT/S PortsContents ThunderSWITCH 24/3 ETHERNETPGV Package TOP View  24/3 ThunderSWITCHTerminal Internal Description Name RESISTOR³ Terminal Internal Description Name Resistor 10-/100-Mbit/s MAC interface ports 24±26³10-/100-Mbit/s MAC interface ports 24±26 ² Terminal FunctionsDras Dcas Sdram interfaceDclk DrasHost DIO interface Jtag interface Serial MII management PHY interfaceEeprom interface Miscellaneous Power interfaceSummary of signal terminals by signal group function Vlan DIO register groupsInternal Register and Statistics Memory Map SIO Detailed DIO Register MapByte DIO Address VLAN3QID VLAN2QID VLAN1QID VLAN0QIDVLAN5QID VLAN4QID VLAN7QID VLAN6QIDVLAN19QID VLAN18QID VLAN17QID VLAN16QIDVLAN21QID VLAN20QID VLAN23QID VLAN22QIDTNETX3270 reset reinitializes the TNETX3270 0x40000x5FFF IntenableFindnode23±16 Findnode31±24 Findnode39±32 Findnode47±40 Findcontrol Findnode7±0 Findnode15±8Receiving/transmitting management frames State of DIO signals during hardware resetInterface description Network management port Frame format on the NM port FCS Vlan IDTpid TCI CRCMbit/s and 10-/100-Mbit/s MAC interface receive control MII serial management interface PHY managementGiant long frames Short framesData transmission Receive filtering of framesTransmit control Adaptive performance optimization APO transmit pacingUplink pretagging Receive versus transmit prioritySource Port Source-Port Pretag EncodingPort 27 NM Received Pretag Port AssignmentsTAG GND Eeprom interfaceEdio TNETX3270 Eclk SCL SDA Interaction of Eeprom load with the SIO register Outcome Stop Load Initd ² Fault LED EclkSummary of Eeprom load outcomes Summary of Eeprom Load OutcomesJtag Instruction Opcodes Jtag interfaceHighz instruction LED interfaceLED Status Bit Definitions and Shift Order Hardware configurationsLamp test Multi-LED displayTNETX3270 TNETE2008 Terminal Mbit/s Interface ConnectionsM03TXD M04TXD Port CLK Sync TXD3M06TXD M03COLConnecting to TNETE2008 PHY² Switch TNETE2101 Terminal 10-/100-Mbit/s port configuration10-/100-Mbit/s MAC interfaces ports 24±26 100-Mbit/s Interface Connections10-/100-Mbit/s port configuration in a nonmanaged switch Speed Configuration ± MxxFORCE10Duplex Configuration ± MxxFORCEHD 10-/100-Mbit/s port configuration in a managed switch Sdram Terminals Not Driven by the TNETX3270 Sdram interface TNETX3270 Terminal Interface to SDRAMsTerminals Sdram Terminal Function TNETX3270 Held Sdram Terminal Terminal FunctionSDRAM-type and quantity indication TNETX3270 State Terminal During ResetInitialization RefreshIale Frame routingVlan support Ieee Std 802.1Q headers ± transmission Address maintenanceIeee Std 802.1Q headers ± reception Frame-routing determination Spanning-tree supportAging algorithms Frame-Routing Algorithm SPWS043B ± November 1997 ± Revised April CDE Port mirroringFlow control Port trunking/load sharingIeee Std 802.3 flow control Collision-based flow controlPause frame reception Internal wrap test PHY TNETX3270 Duplex wrap testCopy to uplink Parameter Test Conditions MIN TYP MAX Unit Recommended operating conditionsMIN NOM MAX Unit Test measurement Parameter MIN MAX Unit MIN MAX Unit10-/100-Mbit/sreceive ports 24, 25 10-/100-Mbit/s MAC interfaceTiming requirements see Note 7 and Figure 10-/100-Mbit/stransmit ports 24, 25, Timing requirements see FigureSdram command to command see Figure Sdram subcycle TdDA Delay time, from Dclk ↑ to DA InvalidDclk Dras DcasSDATA7± Z SDATA0 DIO/DMA interfaceDIO/DMA write cycle DIO/DMA read cycle Serial MII Management Read/Write Cycle Parameter TNETX3150 TNETX3150A Unit MIN MAX Eeprom² During hard reset, Ledclk runs continuously TdLEDDATA Delay time, from LEDCLK↑ to 1st LED invalidTsuRESET Setup time Low before Oscin ↑ Power-up Oscin and Reset Timing requirements see FigureThRESET Hold time Low after Oscin ↑ TtOSCIN Transition time, Oscin rise and fallMechanical Data Important Notice