Panasonic AW-SW350E manual 16 E 17 E

Page 10

]Y/C Signal Input Jacks [Y/C IN 1, 2, 3, 4, 5]

Connect YC signals to these jacks in using them as video input signals.

Caution

Do not connect a BNC coaxial cable to Video Signal Input Jack p in case of connecting YC signals to Y/C Signal Input Jack ]. Use either composite signals or YC signals as video input signals.

4

3

 

Pin No.

Signal

1

Y GND

 

 

 

2

1

 

 

 

2C GND

3Y

4C

AVideo Output Connectors [PGM OUT 1, 2]

Two sets of composite signals (BNC) consisting of the switcher's main output together with the wipe, mix, key or other effects added are output from these output jacks.

SPreview Output Connector [PVW OUT]

When the switcher is used for live applications, this connector enables the next operation to be previewed. (LOOK AHEAD PREVIEW)

•While the Fader Lever is at the A-bus side and A-bus signals are output, the B-bus signals are output to the PVW OUT Connector, and the images can be previewed.

•When the PGM OUT Connectors are in the key OFF status, the PVW OUT Connector is set to the key ON status and the key synthesis status can be previewed.

The table below shows the correlation between the programme output and preview output statuses.

 

Bus selection

Key ON/OFF

PGM OUT

A-bus selected

B-bus selected

Key ON

Key OFF

PVW OUT

B-bus output

A-bus output

Key OFF

Key ON

DGenlock Input/BB Output Connector [GLIN/BBOUT]

ENGLISH

Genlock input: To apply genlock to the switcher, connect this signal to the signal

In compliance with the setting of the SETUP switch K, either the genlock input or BB

 

output is selected.

 

 

generator or other device.

 

BB output:

At this position, the BB sync signal is output to apply genlock to a camera

 

 

or other input device by synchronizing it to the switcher. In this case, the

 

 

same signal as BBOUT F is output.

 

FBlack Burst Signal Output Connector [BBOUT]

Used to externally synchronize a input device connected to the Live Switcher. When externally synchronizing two or more devices, distribute the black burst output to them using a video distributor (VDA).

GY/C Video Output Connector [PGM Y/C OUT]

This connector delivers the Y/C signal video output which has the same function as the video output signal A.

Caution

Due to what is involved in the signal processing, the Y/C video output G has a phase which is delayed by 1 line compared with the composite video output A.

HAuto Take External Input Jack [EXT TAKE]

Use it for external auto take by applying a contact input. The operation is the same as when using Auto Take Switch u and Key Auto Switch I.

✽Use an M3.5 stereo single head plug for connection with this unit.

Connect the switches as shown below.

AUTO TAKE

KEY AUTO

16 (E)

17 (E)

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model No. AW-SW350E $ do not Remove Panel Cover by Unscrewing Contents Refer all servicing to qualified personnel PrefaceNo water or moisture inside Features PrecautionsQPower Indicator Power EWipe Pattern Selection Switches Wipe PatternRSetting Switch Setting WPower Switch Power ON/OFF10 E 11 E 12 E 13 E Rear Panel 14 E 15 E16 E 17 E 18 E 19 E Functions SpecificationsImage Transfer Function 20 E 21 E22 E 23 E Installing the Device DriverUSB cable Installing the Application Programme 24 E 25 EOperation Method 26 E 27 E28 E 29 E Specifying the image start position30 E 31 E When images could not be transferredTransfer time 32 E 33 E ConnectionsVTR, etc 34 E 35 E These switches operate whether the FSConnection to Personal Computer Windows PC Connected with USB cableAW-HB505 36 E 37 ETo pan/tilt head AW-PH300A Camera AW-E300/E600/E800A Preview monitorRack Mounting Video signal output phase frame synchronizer is OFFRack Mounting 38 E 39 EStandard Accessories 40 E 41 EInhalt Vorsicht VorwortWarnung Alle Wartungsarbeiten qualifiziertem Personal überlassenMerkmale VorsichtsmassnahmenOberseite Steuerpult 10 G 11 G 12 G 13 G Rückwand 14 G 15 G16 G 17 G 18 G 19 G Technische Daten BildübertragungsfunktionFunktionen 20 G 21 GInstallieren DES Gerätetreibers 22 G 23 GInstallieren DES Anwendungsprogramms 24 G 25 GBedienungsverfahren 26 G 27 GWenn das Bild größer als die anzeigbare Pixelzahl ist 28 G 29 GWenn das Bild kleiner als die anzeigbare Pixelzahl ist 30 G 31 G Wenn die Bildübertragung misslungen ist32 G 33 G AnschlüsseAnschluss Ohne Externe Synchronisierung VTR uswAnschluss AN Einen PC 34 G 35 GAnschlussbeispiel MIT SCHWENK-/NEIGEKÖPFEN UND Steuerpult 36 G 37 GEinbau in EIN Rack Informationen ZU SYSTEM-UPGRADESEinbau in EIN Rack 38 G 39 G40 G 41 G Technische DATEN/STANDARDZUBEHÖRStandardzubehör LeistungsaufnahmeTable des matières Avertissement AVERTISSEMENT/CONSIGNES DE SécuritéPréface Confier tout entretien à un personnel qualifiéCaractéristiques PrécautionsQIndicateur dalimentation Power Panneau Supérieur Panneau DE CommandeRCommutateur de réglage Setting WInterrupteur dalimentation Power ON/OFF10 F 11 F 12 F 13 F Panneau Arrière 14 F 15 F16 F 17 F 18 F 19 F Spécifications Fonction DE Transfert DimageFonctions 20 F 21 FInstallation DU Pilote DE Périphérique 22 F 23 FInstallation DU Programme Dapplication 24 F 25 FMéthode DE Fonctionnement 26 F 27 F28 F 29 F Réglage de la position de début de limage30 F 31 F Si le transfert dimage a échouéRaccordement Sans Synchronisation Externe Raccordements32 F 33 F Raccordement À UN Ordinateur Individuel 34 F 35 F36 F 37 F Montage EN Rack Montage EN Rack38 F 39 F Accessoires Standard SPÉCIFICATIONS/ACCESSOIRES Standard40 F 41 F Sommario Precauzioni PrefazioneAvvertimenti Fare attenzione allacqua e allumiditàCaratteristiche PrecauzioniParte Superiore Pannello Comandi Normale TInterruttore di selezione colore di sfondo ColorYInterruttore di selezione direzione tendina N/ N/R/ R Normale/ReverseWIndicatore di congelamento FRZ PVolume intercom Incom LevelComandi di fase genlock GEN-LOCK Phase OPresa intercom IncomPannello Posteriore SConnettore di uscita di anteprima PVW OUT Prese di ingresso segnali Y/C Y/C in 1, 2, 3, 4AConnettori di uscita video PGM OUT 1 DConnettore di ingresso genlock/uscita BB GLIN/BBOUTQInterruttore di sincronismo quadro FS ON/OFF JPorta USB USBKInterruttori di impostazione RInterruttore di selezione bus BUS A/B /F.FFunzioni SpecificheInstallazione DEL Driver DEL Dispositivo Cavo USBInstallazione DEL Programma Dellapplicativo Avviare il programma di installazione E\JPN\SETUP.EXESchermata di avvio programma di installazione applicativo Metodo OperativoSpecificazione della posizione di avvio dellimmagine Se non è stato possibile trasferire le immagini Selezione della memoriaCollegamento Senza Sincronizzazione Esterna CollegamentiVTR, ecc Monitor a colori Collegamento AL Personal ComputerPC con sistema Windows Collegato con cavo USB Monitor di anteprima Fase di ingresso segnale video Fase di uscita segnale video Montaggio SU RackMontaggio SU Rack Di 1 quadro maxAccessori Standard Dati TECNICI/ACCESSORI StandardDati Tecnici Índice Advertencia PrefacioPrecaución Características PrecaucionesWInterruptor de la alimentación Power ON/OFF RConmutador de ajuste SettingQIndicador de la alimentación Power Panel Superior Panel DE Control10 S 11 S 12 S 13 S Panel Posterior 14 S 15 S16 S 17 S 18 S 19 S Especificaciones Función DE Transferencia DE ImágenesFunciones 20 S 21 SInstalación DEL Controlador DE Dispositivos 22 S 23 SInstalación DEL Programa DE Aplicación 24 S 25 SMétodo DE Operación 26 S 27 S28 S 29 S 30 S 31 S Cuando no se puedan transferir las imágenes32 S 33 S ConexionesConexión SIN Sincronización Externa PrecauciónEstos conmutadores funcionan tanto si Conexión a Ordenador Personal34 S 35 S El conmutador FS está en la posición36 S 37 S Puertos AW-HB505Montaje EN Estantería Montaje EN Estantería38 S 39 S Accesorios Suministrados 40 S 41 S42 S 43 S Web Site http//www . panasonic . co . jp/global

AW-SW350E specifications

The Panasonic AW-SW350E is a state-of-the-art live switcher designed for professional broadcasting and production environments. Known for its versatility and advanced features, this compact switcher stands out in both live events and studio applications.

One of the main features of the AW-SW350E is its ability to handle various video formats, including HD and SD signals, allowing seamless integration into any production workflow. It supports a wide range of input sources, including HDMI, 3G-SDI, and NDI, making it ideal for diverse broadcasting scenarios. This flexibility ensures that users can switch between different types of video feeds effortlessly.

The switcher boasts a user-friendly interface with a high-resolution touchscreen LCD. This interface allows operators to manage multiple video sources and control transitions smoothly. The AW-SW350E includes various transition effects, such as dissolves, wipes, and fades, enhancing the visual appeal of live broadcasts. Additionally, customizable layout options provide users with the ability to tailor the interface to their specific needs.

For enhanced production capabilities, the Panasonic AW-SW350E integrates advanced technologies such as 4K video support and multi-view functionality. This enables operators to view multiple sources simultaneously, making it easier to monitor feeds and make real-time decisions during live events. This function is particularly valuable for sports broadcasts, live concerts, and corporate events where multiple cameras are in use.

Another significant characteristic of the AW-SW350E is its built-in streaming capabilities. With support for various streaming protocols, the switcher can distribute live content directly to multiple platforms, including social media and video-sharing websites. This feature has become increasingly important in today's broadcasting landscape, where an online presence can greatly enhance audience reach.

Moreover, the AW-SW350E is equipped with robust audio mixing capabilities, allowing users to balance and control audio from different sources. This ensures that both video and audio quality are maintained for a professional output.

In summary, the Panasonic AW-SW350E live switcher stands out due to its versatility, advanced technological features, and user-friendly design. Its ability to cater to various broadcasting needs, coupled with support for multiple input formats and live streaming, makes it a reliable choice for professionals seeking a high-quality switching solution in both live and studio environments.
Top Page Image Contents