SSI America 9210 user manual Full Calibration, Menu Item Security Level

M4557 - Model 9210 Nitriding Controller

Span Output 2

Enter measured output current (mA) Calibrate

Edit

<-- Back Skip Next --> DONE

The next screen is the Span Output 2 screen. This screen will allow the user to set the span value for Output 2. Measured at terminals 26(-) and 25(+) for this step. The progress bar at the bottom of the screen will display the calibration progress.

The next screen indicates that the calibration process is complete.

Full Calibration

This screen is used by SSi personnel, and it is a longer version of the User Calibration menu.

Set Menu Security

This menu allows the user to set the security level for all of the menu screens to one of three levels:

1.Operator – Lowest Level, No Pass code Required

2.Supervisor – Middle Level, Level 1 Pass code Required

3.Administrator – Highest Level, Level 2 Pass code Required.

The menu items with security levels are:

Menu Item	Security Level
Program Edit	Supervisor
Auxiliary Instruments	Operator
Auxiliary Analog Input	Operator
Shutdown	Operator
9210 Date and Time	Supervisor
Slave Communications Status	Supervisor
Manual Event Control	Supervisor
PID Loop Setup	Administrator
Event Run Program Setup	Administrator
Zone/Load TC Setup	Administrator
Port Setup	Administrator
Instrument Setup	Administrator
Zone Assignments	Administrator
Furnace Setup	Administrator
Default Wait Limits	Administrator
Furnace Name	Administrator
Alarm Setup	Administrator
Relay Assignments	Administrator
Relay Setpoints	Administrator
Analog Input Setup	Administrator
Analog Output Setup	Administrator
Passcode and Alarm	Administrator
IP Address	Administrator
Event Control	Administrator
Valve Configuration	Administrator
Valve Setup	Administrator
User Calibration	Administrator

SSi Manual SERIES 9210-M4557-Nitriding Page 36 of 36