Toshiba 4000 manual To Park a Call Locally, Press the Call Park-Local CP-L access key

PERCEPTION 4000 FEATURE OPERATION

2.Wait to be connected to the held call.

NOTE:

If the held party hangs up before the call is retrieved, the line appearance LED will go out and, if you attempt to retrieve the call, you will hear dial tone.

To Park a Call Locally:

1.Establish a two-way connection.

2.Press the Call Park—Local (CP-L) access key.

. . . or . . .

Press the CONF/TRNS key and then enter the Call Park—Localaccess code.

To Retrieve a Call Locally:

1.Go off-hook to retrieve the locally-parked call on the line provided by your station’s line preference type.

. . . or . . .

Press an idle line key to retrieve the parked call on a line other than that automatically provided by your station’s line preference.

CALL PARK

By using the Call Park feature, you can hold an active call at any extension, and then retrieve the call at the same (Local) or another (Remote) extension. Calls can be parked on any prime or logical line, allowing stations with multiple line appearances to have more than one call parked at the station. Only one call can be parked on a particular line.

Any of your telephone’s line appearances can be used.

Listen for success tone. The call will be parked on your telephone’s prime line, regardless of which line the call was on originally.

If the call is not retrieved within a predetermined time period, the call will recall your station’s prime line.

When using a CP-L key, the CP-L LED will light solid red and will remain lit while the call is parked.

After activating Call Park, reorder tone will sound if you do not hang up within a predetermined time period.

4-13