Toshiba 4000 manual Direct Isdn Service Access, To Call a Dictation Machine Group

PERCEPTION 4000 FEATURE OPERATION

To Call a Dictation Machine Group:

1.Press the Dictation

Machine—Group (DC-G) access key.

. . . or . . .

Enter the Dictation Machine—Groupaccess code.

2.Enter the number of the dictation machine group (2 digits).

3.When the call is answered, use the dialpad to operate the dictation machine.

4.To disconnect the call, hang up your telephone.

Listen for recall dial tone.

An idle dictation machine within the group will ring. Listen for ringback tone.

NOTES:

1.If a called dictation machine or dictation machine group is busy, you will hear busy tone.

2.You can perform an on-hook or off-hook camp-on to a dictation machine group (but not to an individual dictation machine).

3.Dictation machines cannot be assigned as a destination for Call Forward.

4.A dictation machine call cannot be placed on hold or be a member of a call conference.

DIRECT ISDN SERVICE ACCESS

If allowed at your station, you can access an ISDN service to place a call to another station within the ISDN public network. Each ISDN public networking service, such as MEGACOM 800 or Software Defined Network, is associated with a certain trunk group or trunk groups. Once an ISDN service/trunk is accessed, you may also have the option of enabling and/or disabling the transmission of Calling Party Number information to the distant end. Calling Party Number information can be transmitted or blocked on a call-by-call basis through the entrance of specific feature access codes. These capabilities are determined by the programming of ISDN trunk groups, as well as by your station’s assigned Class of Service.

4-27