Toshiba 4000 manual Press the Call Park-Remote CP-R access key, To Retrieve a Call Remotely

PERCEPTION 4000

2.Press the CP-Lkey.

. . . or . . .

Enter the Call Park—Local access code.

To Park a Call Remotely:

1.Establish a two-way connection.

2.Press the Call Park—Remote (CP-R) access key.

. . . or . . .

Press the CONF/TRNS key and then dial the Call Park—Remoteaccess code.

3.Dial the directory number of the line on which the call is to be parked.

To Retrieve a Call Remotely:

1.Go off-hook to retrieve the remotely-parked call on the line provided by your station’s line preference type.

. . . or . . .

Press an idle line key to retrieve the parked call on a line other than that automatically provided by your station’s line preference.

2.Press the CP-Rkey.

FEATURE OPERATION

You will be connected to the parked call.

When using a CP-L key, the CP-L LED will go out.

The connected party will be placed on “soft hold.”

Listen for recall dial tone.

The dialed directory number can appear on any telephone.

Listen for success tone. The call will now be parked on the dialed line.

If the call is not retrieved within a predetermined time period, the call will recall the prime line of the station that initiated the park.

The CP-L LED on the station whose prime line is the call park destination will light solid red and will remain lit while the call is parked. If the line on which the call is parked is not a prime line on any station (e.g., a logical line), there will be no indication of the parked call on any station containing that non-prime line appearance.

4-14