Toshiba 4000 manual Call Waiting, To Answer a Waiting Call

PERCEPTION 4000 FEATURE OPERATION

To transfer the call without an announcement, hang up. The transferred call will ring the destination party.

station. If the recall is not answered, then after a predetermined time period, the call may be rerouted to another destination, as programmed in the system database.

NOTES:

1.Any internal call can be transferred to either another station or a trunk party. External trunk calls can be transferred to another station or, if allowed by your system and your telephone, to another trunk party. A trunk or Least Cost Routing access code can be entered when transferring a call to an outside party.

2.You cannot transfer an attendant call, a call involving an ancillary device (dictation machine, etc.), a call involving a party that has another party on “soft hold,” or a call involving a party that is involved in a conference.

To Answer a Waiting Call:

1.Establish a two-way connection.

2.To access the new call, press the SWAP access key.

. . . or . . .

Press the CONF/TRNS key, listen for recall dial tone, and enter the Swap access code.

3.To alternate between calls, repeatedly press the SWAP key or continue to press the CONF/TRNS key, listen for recall dial tone, and enter the Swap access code.

. . . or . . .

CALL WAITING

The Call Waiting feature advises you of an incoming call to a line that you are currently using. The incoming call is automatically camped-on to your telephone. You can access the new call by using the Swap access key or code. The Swap key or code can also be used to alternate between calls.

If a new call arrives and is camped-on to your line, you will hear Call Waiting tone.

Your current call will be automatically placed on “soft hold” and you will be connected to the new call.

If desired, you can transfer the new call to another destination by using the Call Waiting Transfer feature.

Each time, the two calls will be switched.

4-18