Toshiba 4000 manual Enter the Call Forward Cancellation access code

PERCEPTION 4000 FEATURE OPERATION

5.To program another PRCF key, follow steps 2 ~ 4.

6.When all PRCF keys are programmed, press the PRGM key.

To Forward Calls via a Preregistered Call Forward Key: 1. Press the desired PRCF key.

To Cancel Call Forward:

1.Press the activated CFAC, CFNA, CFBN, or PRCF key.

. . . or . . .

Enter the Call Forward Cancellation access code.

Your telephone will be taken out of Program Mode.

The PRCF key can be pressed while your telephone is either an idle or in a talk state.

The PRCF LED will light solid red.

Display telephones will indicate the type of Call Forward registered (CFAC, CFNA, CFBN), along with the name and number of the forwarded-to destination.

Any incoming calls will now be treated as defined by the registered type of Call Forward.

The key’s corresponding LED will go out and you will hear success tone.

Incoming calls will now be terminated normally.

NOTES:

1.Up to 24 digits can be programmed on each PRCF key. Available

digits are 0 ~ 9 and *, and #. Special functions are available to signify dial tone, pauses, and the end of dialing. Enter * * for dial tone; * n for a pause of n length (e.g., * 6 = a 6-second pause and

*9 * 7 = a 16-second pause); and # to signify the end of dialing.

2.Off-premises destination numbers can include the LCR access code, trunk access codes plus destination numbers, or Speed Calling numbers.

3.If your station’s assigned Class of Service or Outdialing Restrictions do not allow an off-premises number to be called, your telephone will indicate this in one of two ways. When using a feature access key to register Call Forward, the feature access key LED will flash red. When using a feature access code to register Call Forward, you will hear reorder tone after dialing the number.

4.If Preregistered Call Forward is activated while a telephone’s prime line is ringing or while a call is camped-on to the line, Call Forward

4-10