![](/images/new-backgrounds/1329792/329792149x1.webp)
PERCEPTION 4000 | FEATURE OPERATION |
4.When connected to the party, press the CONF/TRNS key to join the held party and form a
If the called party is busy or does not answer, you can return to the held party by pressing the Release (RLS) key.
If the called party is busy, you can automatically
If the called party answers, you can alternate between this party and the held par ty by repeatedly pressing the Swap access key (see Consultation Hold).
If there are no conference circuits currently available, you will hear reorder tone. If this occurs, press the RLS key to connect to the held party.
The conference will be maintained until one or both of the parties hang(s) up. When one party disconnects, you will be connected to the remaining party.
At any point during the conference, you can drop the
NOTES:
1.A call to an attendant cannot be placed on hold.
2.You cannot use more than one line appearance key to form a three- way conference.
3.If you hang up at any point before establishing a connection with a third party, the held call will immediately recall your station.
TRUNK VERIFICATION FROM STATION
The status of a specific trunk can be verified by simply entering a feature access code and the equipment number of the trunk. Trunk Verification from Station is especially convenient for system administrators or maintenance personnel who need to verify trunk activity. The PERCEPTION 4000 system indicates each trunk's busy or idle status by providing busy or dial tone and trunk status displays.