Toshiba 4000 manual Code Calling, To Place a Code Call

PERCEPTION 4000 FEATURE OPERATION

To Place a Code Call:

1.Press the CONF/TRNS key to place any current caller on “soft hold.”

2.Press the Code Calling (CC) access key.

. . . or . . .

Enter the Code Calling access code, plus the desired code call paging zone number.

3.Enter the desired code call identity code.

4.Hang up. The paged party can now retrieve the held call.

. . . or . . .

If you have initiated a code call from an idle telephone, you can stay off-hook and receive the code call response.

2.The Camp-on Transfer feature is not available if the held party has another party on hold or if the held party is involved in a conference.

3.If the held call is camped-on to the busy line longer than allowed by the predetermined timeout period, the held call will recall to your station.

CODE CALLING

You can page an individual via a code call chime or bell, if your system is equipped for this operation. You can page the party to pick up another held call or to pick up your call.

This will hold the call until retrieved by the paged party. A code call can also be placed from an idle telephone.

Listen for recall dial tone.

Display telephones will display Code Calling access.

If the Code Calling circuit is busy, you can connect to the held call by pressing the Release (RLS) key.

If the code is accepted, you will hear success tone.

If you hang up before entering a complete code, the held call will recall your station.

To Answer a Code Call:

1. Press the Code CallingListen for recall dial tone. Retrieval (CCMM) access key.

. . . or . . .

Enter the Code Calling

Retrieval access code.

4-23