Toshiba 4000 manual Speed Calling, To Activate Speakerphone Operation

PERCEPTION 4000

To Activate Speakerphone Operation:

1.Press the telephone’s Speaker (SPKR) key.

. . . or . . .

Press a desired line key, Autodial key, Save and Repeat key, Last Number Redial key, or dialpad digit key.

2.Continue dialing any remaining digits or pressing any feature keys required to place your call.

FEATURE OPERATION

SPEAKERPHONE OPERATION

Speakerphone Operation allows you to place telephone calls and activate features without lifting the telephone handset. This is accomplished by activating the telephone’s built-in speaker and microphone. When activated, the speaker replaces the handset earpiece, and the microphone replaces the handset mouthpiece. You can switch between handset and speakerphone modes at any time during a call.

Speakerphone Operation will now be activated. Your telephone’s speaker and microphone will be automatically activated, and the SPKR and MIC LEDs will light solid red.

Unless you select a specific line on which to make your call, you will automatically access the line provided by your telephone’s line preference type. If your station has no line preference, you must press the desired line key before dialing.

At any point during call placement or operation, you can switch back to handset mode by picking up the telephone’s handset. To return back to Speakerphone Operation, press the SPKR key and hang up your telephone.

NOTE:

When Speakerphone Operation is activated and you are involved in a call, you can send DTMF tones to the distant end (for voice mail codes, credit card codes, etc.) by pressing the appropriate digit keys.

SPEED CALLING

Speed Calling allows you to dial lengthy number sequences by entering representative, abbreviated Speed Calling numbers. Each station can access a series of system-wide Speed Calling numbers, as well as those numbers that are assigned to the station’s Speed Calling group(s).

4-45