TELEPHONE OPERATIONS
Placing a Call
1.Press the TALK button (TALK button will illuminate GREEN) and dial the number you wish to call.
2.To end the call press the TALK button or place the handset in the base.
Or
1.Press the keys of the numbers needed to dial. The LCD will display PREDIAL and the
keys pressed.
2.Press the TALK button. Handset will go off- hook and dial the displayed numbers.
Answering a Call
If the handset is out of the cradle, press the
TALK button.
If the handset is in the cradle with
If the handset is in the cradle with AutoConnect mode OFF, lift the handset.The handset will be in standby mode. Press TALK button to receive the call.
Refer to BOOST Clarity Power and Volume Control for information on adjusting volume controls on Page 19.
Last Number Redial
The last number dialed (up to 32 digits) is stored in the redial memory until another number is dialed.
To use this feature:
1.Press the TALK button.
2.When you hear the dial tone, press the RD/P button.
3.The phone will automatically dial for you.
TELEPHONE OPERATIONS
Pause Feature
Programming in a pause will cause the phone to wait four (4) seconds before dialing additional numbers. This feature may be used when it is necessary to dial an access code (9, for example) and wait for a sec- ond dial tone before you can dial an outside number. Press the RD/P button at the required point during the memory storage process to program a pause.
Temporary Tone
If you have rotary (pulse) dial service, you can change from pulse to touch tone (tone) during a call.
1.Make phone call and wait until it is connected.
2.Press the * key. Keys pressed after this are sent as tone signals.
3.The phone will automatically reset to rotary (pulse) service after the call ends.
Lighted Key Pad
The key pad will light for fifteen (15) seconds after removing the handset from the base.To reactivate the feature while in standby, press the TALK or the MEM button.To activate while the phone is in use, press any key.
Page/Handset Locator
To send a page signal from the base to the handset, press the PAGE button located on the base of the telephone.A series of rings will sound from the handset.
To locate the handset if it is away from the base, press and hold the PAGE button for approximately five (5) seconds. A series of rings will sound. Return the handset to the base or press any
button to cancel the page.
24 | 25 |