Clarity C4210 manual Caller ID Operations

TELEPHONE OPERATIONS

3.Press the UP (▲) or DOWN (▼) button to go to the record to be stored to the EMERGENCY key.

4.Press and hold the EMERGENCY key for 2 seconds.

5.The phone number is copied to the EMERGENCY key.The LCD will display MEM STORING for one (1) second and the handset will give a success keynote.

Dialing the EMERGENCY Number

1.Unit must be in standby mode only.

2.Press the EMERGENCY key once.

3.The display will show the stored name and number for 5 seconds. Otherwise it will show -MEMORY EMPTY-.

4.Then the handset goes off-hook and dial out the stored numbers.

Or

5.Press TALK key to make handset goes off-hook.

6.Press the EMERGENCY key once.The display will show the stored name and number for 1 sec.Then the numbers will be sent out.

Deleting the EMERGENCY Number

1.Unit must be in standby mode.

2.Press the EMERGENCY key once.

3.If this key has been programmed, the display will show the stored number. Otherwise, it will show MEMORY EMPTY.

4.Press DEL/CH key once to delete number.

5.The display will flash DELETE?.

6.Press DEL/CH to delete.The handset will give a success keynote and the display will show MEM DELETED.

TELEPHONE OPERATIONS

CALLER ID OPERATIONS

Visual Message Waiting Indicator (VMWI)

Note:This is a service that is provided through your local telephone company.

If the C4210 finds that there is voice message to be retrieved, it will turn on the Message Waiting Indica- tor (the ENTER key).

To retrieve the voice message, press the ENTER key while the indicator is on.The handset will go off- hook and dial the stored Voicemail number.

CALLER ID Information

This function is turned off when EASY MODE is set to ON during setup.

Caller Information

When somebody calls, the received caller informa- tion is displayed on the LCD. If the call is answered by this phone, this caller information is considered “old”. Otherwise, the Caller ID information will be stored in the call log. Information which has not been reviewed will be considered as “new call”.

The NEW CALL LED will blink.The top row displays the time and date of the call.The second row displays the caller’s ID or is blank if there is no information.

The third row displays the incoming telephone num- ber. If the number is longer than twelve (12) digits, the LCD will toggle the displayed number between the first 12 digits and the remaining digits.

Receiving Call Waiting Caller ID

When you are on an existing call, you will hear a beep and the display will show incoming call waiting Caller ID information.

30 31