Clarity C4210 manual Unknown Call, Blocked Call, Repeated Call, Caller ID Review

TELEPHONE OPERATIONS

If you access the call waiting call, the Caller ID information will disappear and the Time/Day screen will appear.

If you do not access the call waiting call, the Caller

ID information will be transferred into the Caller log.

This caller information is considered “old”.

Unknown Call

If a call is from another country or the caller’s number is not available, UNKNOWN is displayed and stored in the Caller ID log.

Blocked Call

If the number is blocked or withheld, PRIVATE is displayed and stored in Caller ID log.

Repeated Call

If this is a repeated call, it means the same number called before and has not been reviewed.

CALLER ID Review

If there is new call information, the MODE button will flash RED.

During standby mode, press MODE button once.

LCD will display CID MODE and then the last Caller

ID information.

Press UP (▲) or DOWN (▼) again to view the Caller ID content. Press DOWN (▼) to scroll the caller ID information from the most recent record. Or, press the UP (▲) button to scroll the Caller ID information from the oldest record.

If the caller’s number is more than (12) digits, the LCD will toggle the displayed message between the first 12 digits and the remaining digits.

32

TELEPHONE OPERATIONS

If the Caller ID list is empty, the display will show

-NO CALLS -.

•At anytime, the user can press FLASH button one time to go back to standby mode.

Or

•It will go back to standby automatically at 30 seconds time out if there is no action.

Saving CALLER ID Information to

Phonebook

1.While reviewing Caller information, press PROG key once.

2.The display shows SAVE TO PHONEBOOK. Then it changes to ENTER TO END, and the Caller number on the third line with the blink- ing cursor at the end of the number.

3.Use numeric key to add extra numbers. Press DEL/CH to erase any mistakes.

Or

Press DEL/CH to move cursor back one digit. Then press any other numeric key to replace the number.

4.Press ENTER to confirm the number.

5.The display shows ENTER NAME first and then the Caller’s name on the second line with blinking cursor at the end.The entered number is displayed on the third line.

6.Press 2-9 keys to add extra characters. Press DEL/CH to erase any mistakes.

Or

Press DEL/CH to move cursor back one char- acter.Then press any other numeric key to replace the character.

7.Press ENTER to confirm the name.

8.The display will show NUMBER STORED first.Then it shows the name and number

just saved. 33