Clarity C4210 manual Feature SET UP, Telephone Handset

FEATURE SET UP

TELEPHONE HANDSET

Set-up Mode

The C4210 handset goes into setup mode automati- cally when the battery is connected.

Or press and hold MODE button for 3 seconds to enter setup mode. If there is no input within 30 seconds, the language will be set to the last selected one and go back to standby mode.

Setting Language

1.After entering setup mode, the LCD display will show SEL LANGUAGE and then 1.ENG 2.SPA alternately with a tick mark against the selected language.

2.Press the 1 or 2 button once to change the language.The tick mark will move against the new selection.

3.Press UP (▲) to go to the next menu.

Setting Contrast

There are 3 contrast levels and the default is set to level 2.

1.After setting the language, press UP (▲) key to begin setting contrast.

2.The LCD display will show LCD CONTRAST and 1 2 3.

3.Press the 1, 2 or 3 key to change the level. The current selected level will be highlighted.

4.Press the UP (▲) or DOWN (▼) button to go to the next menu.

Setting Area Code 1

1. After setting Contrast, press UP (▲) button to set Area Code 1.

2. The LCD display will show AREA CODE 1

FEATURE SET UP

3.Enter the area code number using the numeric keys on the handset.

4.Press the UP (▲) or DOWN (▼) button to go to the next menu.

Setting Area Code 2

1.After setting Area Code 1, press UP (▲) button to set Area Code 2.

2.The LCD display will show AREA CODE 2 and XYZ with X digit blinking.

3.Enter the area code number using the numeric keys on the handset.

4.Press the UP (▲) or DOWN (▼) button to go to the next menu.

Setting Long Distance Service (LDS) Code

1.After setting Area Code 2, press UP (▲) button to set LDS Code.

2.The LCD display will show LDS CODE and X with X digit blinking.

3.Enter the LDS number using the numeric keys on the handset.

4.Press the UP (▲) or DOWN (▼) button to go to the next menu.

Setting Easy Mode

1.After setting LDS Code, press UP (▲) button to set the Easy Mode.

2.The LCD display will show EASY MODE and 1.ON 2.OFF.

3.Press 1 or 2 to change the mode.The tick mark will move against the selected mode.

4.Press the UP (▲) or DOWN (▼) button to change the mode.

16

and XYZ with X digit blinking.

17