5.1.9 External Sensor
Feature Manual References
3.1.19 COS (Class of Service)
Operating Manual References
1.3.27External Relay
5.1.9External Sensor
Description
External sensing devices, such as security alarms or smoke detectors, can be connected to the PBX. When the PBX receives input from a sensor, a call is made to the preset destination, alerting the extension user. The available destinations of a sensor call are as follows:
[Available Destinations]
Destination
Wired Extension
PS
ICD Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Extension of Another PBX (via TIE Line, Access with PBX Code)
Extension of Another PBX (via TIE Line, Access without PBX Code)
Availability
ü
ü
When the call is answered, if distinctive dial tones are enabled, dial tone 3 is heard, which continues until the user goes
Conditions
•Hardware Requirement:
•Some devices may be unable to communicate correctly with the PBX. Confirm compatibility with the manufacturer of a device before installing it.
100
Feature Manual | Document Version |