5.1.5 Extension Feature Clear
•Other features can also temporarily change an extension’s TRS level, similar to Extension Dial Lock. If an extension is locked, the TRS level determined by the following features takes priority. The numbers below (1 through 3) indicate the priority of each feature, with 1 having the highest priority, and 3 having the lowest.
1.Dial Tone Transfer (→ 4.1.4 Dial Tone Transfer)
2.TRS Override by System Speed Dialing (→ 17.1.6 TRS (Toll Restriction))
3.Verification Code Entry/Walking COS (→ 19.1.1 Verification Code Entry, → 20.1.1 Walking COS)
PC Programming Manual References
4.8
→ Extension Dial Lock Set / Cancel
→ Remote Extension Dial Lock Off
→ Remote Extension Dial Lock On
4.11
PT Programming Manual References
[510] TRS Level for Extension Dial Lock
Feature Manual References
3.1.19 COS (Class of Service)
Operating Manual References
1.3.24Extension Dial Lock
3.2.2Manager Programming
5.1.5Extension Feature Clear
Description
Extension users can clear the following features set on their own telephone at once:
Features
Absent Message
BGM
FWD*1/DND*1
Call Pickup Deny
Call Waiting*1
Data Line Security
Executive Busy Override Deny
Message Waiting
Paging Deny
After Setting
Off
Off
Off
Allow
Enable (Call Waiting tone)
Off
Allow
All messages left by other extensions will be cleared.
Allow
Document Version | Feature Manual |
95